Watchguard V2 Specifikace Strana 20
- Strana / 40
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
20
3 Triggering the detector when
set to “most sensitive”
Figure 13 – most
sensitive trigger
In figure 13, a body moving from position 1 to position 2,
into the infrared beam zone, will create a pulse. Moving
from position 2 to 3, out of the other side of the same
infrared beam zone, will create another pulse. If the
detector is set to “most sensitive” and the body moves
from position 1 to position 3 within 10 seconds then the
detector will have received 2 pulses in 10 seconds. This
means the detector will have made a valid movement
detection and will trigger, indicated by the red light (only if
in test mode or normal mode but not in IPS mode). This
also applies if the body moves in the opposite direction.
2 No trigger body movements
Figure 14 – no trigger
No trigger body movements are body movements which
are too small to be recognized as valid body movements to
trigger the detector.
In the example, shown by figure 14, a body walking into
one side of the infrared beam zone, then back out the same
side of the infrared beam zone will not trigger the detector.
A body moving from position 1 to 2, into the infrared
beam zone, will only create pulsing. A body moving from
position 2 back to position 1 or from position 2 to position
3 (out of the same side of the infrared beam zone) may
create further pulses but will not trigger the detector. This
also applies if the body is moving in and out of the infrared
beam zone from the other side.
3.8.5. The Tamper Switch
The tamper switch will open whenever the front cover of the
detector is removed. A tamper signal is automatically
transmitted as well as a normal trigger signal. Each time this
occurs the detector will also automatically enter test mode.
Tamper switch
- Watchguard 1
- Home Alarm 1
- Contents 2
- 1. Introduction 4
- IMPORTANT NOTES 5
- 1.2. What You Get 6
- 2. Installation 7
- 2.2. The Main Unit 8
- 2.3. The Screamer 9
- 2.4. The Power Supply 10
- 2.5. The Detectors 10
- 2.5.1. Tips for positioning 11
- IMPORTANT 12
- 3. Operation 13
- 3.4. DISARMING 14
- 3.2. AWAY Mode 14
- 3.3. STAY Mode 14
- 3.5. PANIC Mode 15
- 3.6. Low Battery Reporting 15
- 3.7. Supervision Reporting 16
- 2 No trigger body movements 20
- 3.8.6. Low Battery Warning 21
- 3.8.7. Supervision 21
- 4. Programming 22
- 4.1. Adding New Remotes 23
- 4.2. Safety Lock 24
- 4.3. Adding a Detector 25
- 4.4. Deleting a Detector 27
- 4.5. Walk Test Mode 28
- 4.6. Alarm Memory 29
- …continued… 31
- 4.8. Arm / Disarm Beeps 32
- 4.9. Resetting the System 33
- 5. Maintenance 34
- 5.2. The Remote Control 35
- 5.3. The Detector 35
- 6. Warranty 37
Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Watchguard V2
(30 stránky)ARTHUR MARTIN ELECTROLUX TVE8803N podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Nie ARTHUR MARTIN ELECTROLUX TVE8803N.
Dostarczamy 1 pdf podręczników ARTHUR MARTIN ELECTROLUX TVE8803N do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Komentáře k této Příručce